- Open the sunroof completely.
- Remove the two bolts from the mounting block on the left and right side. Remove the mounting blocks carefully.
- Degrease the surface where the tape will be located on the left and right side.
- Apply the tape onto the sunroof as illustrated.
- Position the wind deflector at the front.
- Carefully position the mounting block on the left and right side. Check that the lips of the wind deflector are located in the mounting blocks.
- Install the bolts and tighten to 3 Nm (2 lbf ft.).
- Check the function of the wind deflector.
Обсуждение и оценка
0Пока нет комментариев. Будьте первым.