Treble loudspeakers, front door

• Remove the panel at the front edge of the door by carefully prying loose using a plastic weatherstrip tool.

Примечание: Leave the clips for the panel in the door.
- Place the panel to one side. The panel will not be reused
- Take the existing cable positioned behind the panel.

• Take the panel with the loudspeakers from the kit. Pull off the pre-mounted clips (1) and place to one side. Similar clips are left in the door
• Connect the cable (2) prepared in procedure 1 to the connectors for the treble loudspeakers.

• Press the panel with the treble loudspeakers in the clips which are in the door
• Repeat the operation on the other side.