Применимость
| Модель | Двигатель | Год |
|---|---|---|
| XC90 | — | 2007–2009 |
Retaping the side panel
- Remove the side panel from the car.
- Remove the glue residue from the car. Clean the surfaces with a mixture of 70% Isopropanol and 30% water.
- Wipe clean.
- Remove the tape residue from the side panel.
Примечание: Do not use solvent. The tape residue is removed mechanically with a rotating stripe remover, or a piece of rubber. Ensure you do not damage the surfaces of the side panel where the new tape is to be applied.
- Clean the surfaces with a mixture of 70% Isopropanol and 30% water.
- Wipe clean.
- Apply the primer to the tape surfaces on the side panel. Apply the tape on the side panel. Remove the protective paper from the tape.
- Fit the side panel on the car according to assembly instruction 30744180.
Обсуждение и оценка
0Пока нет комментариев. Будьте первым.