Применимость
| Модель | Двигатель | Год |
|---|---|---|
| XC90 | — | 2003–2008 |
- Raise the car
- Remove the rear wheels
- Carefully drill out the rivets holding the fender liner and the bumper cover. Use a 6 mm (1/4 “ ) diameter drill bit. Do not damage any of the plastic components.
- Rivet the mudguard in the fender liner and the bumper cover
- Reinstall the wheels. Tighten to 140 Nm (104 lbf.ft)
- Lower the car.
Обсуждение и оценка
0Пока нет комментариев. Будьте первым.