Reading off input and output signals (1999, 2000)

Применимость

The values and status of transmission control module (TCM) input and output signals can be read using this function.The following parameters can be read off:

• Shifting program, gear-shift position sensor, status
• Gear-shift position sensor, position
• Gear-shift position sensor, signal A
• Gear-shift position sensor, signal B
• Gear-shift position sensor, signal C
• Gear-shift position sensor, signal PA
• Mode selector, ECONOMY/SPORT (E/S), position
• Mode selector, WINTER (W), position
• Shifting program, mode selector, position
• Stop (brake) light switch, position
• Kickdown switch, position
• Kickdown position, shifting, status
• Throttle position (TP) sensor, signal
• Throttle position (TP) sensor, position
• Oil temperature sensor, signal
• Oil temperature, value
• Battery voltage, value
• Vehicle speed, value
• Transmission input speed, value
• Engine speed (RPM), value
• Load signal from engine control module (ECM), value
• Gear in relation to solenoid S1, S2 and SL, status
• Gear in relation to gear ratio, status
• Activating shift solenoid S1, status
• Shift solenoid S1, position
• Activating shift solenoid S2, status
• Shift solenoid S2, position
• Activating lock-up solenoid SL, status
• Lock-up solenoid SL, position
• Line pressure solenoid STH, %, control
• Line pressure solenoid STH, amperage
• Constant idle speed compensation P/N-position and torque limiting when shifting, status
• Warning lamp in combined instrument panel, status
• Emergency programs, status.