Mudguards, rear

• Raise the car.
• Remove the rear wheels.
• Drill out the four rivets that hold the wing liner, use a Ø6 mm (1/4" ) drill bit.

Примечание: Drill carefully so that no plastic parts are damaged.
- Remove any rivet swarf.

• Align the mudguard with the wing liner and bumper.

Примечание: The upper rivet is a different version from the lower one. Ensure that the correct rivet is positioned in the correct place.
- Rivet the mudguard into place.
- Repeat steps 1-2 for the other side.
- Reinstall the wheels and tighten the bolts to 140 Nm (103 lbf.ft.)
- Lower the car.