Применимость
| Модель | Двигатель | Год |
|---|---|---|
| S60 (11-) | — | 2011–2015A |
| V60 | — | 2011–2015A |
- Set the ignition key to position 0.
Примечание: Wait at least one minute before unplugging the connectors or removing other electrical equipment.
- Remove the panel.
- Unplug the connector.
- Remove the screws.
- Remove the screws.
Applies to cars with an automatic transmission
Applies to all vehicles
- Remove the panel.
- Fold the carpet to one side.
- Unhook the clip(s).
- Unplug the connector.
Applies to vehicles with dynamic suspension
Remove the panel.
Unplug the connector
Applies to all vehicles
- Use suitable tape to protect the components.
- Carefully pry off the panel at the lower edge and then all the way around.
Use: Electrician's screwdriver
The panel must not be reused.
- Slacken off the screws.
- The screws will be reused.
- The component(s) must not be reused.
- Disconnect the connectors. The appearance of the parts can vary depending on market.
- Remove the screws.
- The component(s) must not be reused.
- Disconnect the connector(s).
- Plug in the connector.
- Connect the connectors. The number of connectors can vary depending on the vehicle's equipment level. Ensure that the cable is routed in such a way that it does not come into contact with any moving parts.
- Reinstall the screws.
- Connect the connectors. The number of connectors can vary depending on the vehicle's equipment level.
- Reinstall the screws.
- Reinstall the detached components in reverse order.
- Download software (application) for the accessory's function according to service information in VIDA. See VIDA or accessories catalogue for article number on software.