Fire extinguisher (1999, 2000)

• Remove the fire extinguisher from the mounting.

Applies to the 4 door 900 and S90

• Position the holder on the floor between the right-hand wheel arch and the spare wheel panel
• Tighten the holder using the self tapping screws as illustrated.

Applies to the S40 and the V40 with manual seats from chassis number 415 000 inclusive

• Raise the left-hand front seat to its highest point
• Remove the handle (2) by compressing the ends (1)
• Ensure that the rubber washer (3) does not come loose.

Applies to the S40 and the V40 with manual seats from chassis number 415 000 inclusive

• Screw the bracket (1) into place in the existing holes in the front of the seat frame. Tighten to 10 Nm (8 ft.lb.)
• Install the new handle (3)
• Ensure that the rubber washer (4) is in the correct position
• Install the holder (2) on the bracket (1).

Applies to the S40 and the V40 with manual seats from chassis number 415 000 inclusive

• Raise the left-hand front seat to its highest point
• Release the catches (1). Remove the handle (2)
• Install the new handle (3).

Applies to 850, S60, C70, S70, V70 and S80

• Raise the driver's seat to its highest point.

Applies to manual seats for all models

• Release the catches (1). Remove the handle (2)
• Install the new handle (3).

Applies to power seats for 850, S60, C70, S70, V70 and S80

• Cut off the tie strap securing the cable harness in the right hole.

Applies to the 850, S60, C70, S70, V70, S80 and the S40 and V40 with manual seats from chassis number 415 000 inclusive

• Screw the bracket (1) into place in the existing holes in the front of the seat frame. Tighten to 10 Nm (8 ft.lb)
• Install the holder (2) on the bracket (1).

Applies to all car models

• Position the fire extinguisher in the holder. Hook the tensioner in the eyelet, tighten the strap and lock
• Read the fire extinguisher instructions.