Cosmetic panel, doors

• Turn the ignition key to position 0.

Примечание: Wait at least five minutes before disassembling the connectors or removing other electrical equipment.

Remove the door handle's interior panel

• Carefully prise loose the door handle's small interior panel by positioning a weatherstrip in the joint between the top and bottom sections, centered between the three retaining catches.

Removing the door handle panel with door module

Illustration A

• Carefully prise around the door handle panel with door module so that the six clips release and the cosmetic panel releases from the door panel.

Illustration B

• Pull up the panel with door module and unplug the connector on the bottom.

Removing the door module

• Remove the four screws holding the door module at the panel.
• Remove the door module.

Installing a new cosmetic panel

• Take the new panel from the kit and fasten the door module to it.
• Connect the door module connector.
• Press the new panel with door module into place. Make sure all catches engage.
• Refit the small interior panel.

• Repeat steps 2-5 for the other door.