Carrier bag holder in the cargo compartment

• Open the boot lid.

Install:

• the hooks (3) on the rail
• the end stop (4) on the rail
• the plates (1) on the rail using the screws (2), as illustrated.

• Lift up the rail. Insert the plates in the outer holes on the right-hand side, and in the next outer hole on the left-hand side of the underneath of the parcel shelf
• Slide the rail and plates to the left into the holes so that the plates are over the panel edges between the holes
• Install the two screws (2) in the plates (1)
• Pull the rail straight back so that the four screws are in the rear edge of the holes in the underneath of the parcel shelf
• Check that no wiring is trapped
• Screw the rail into place.

Removing the carrier bag from the holder

• Remove the carrier bag from the holder. Carefully move the hook to the side, or move the carrier bag handle as illustrated.