Примечание: The carrier bag holder, which is integrated in the cargo compartment carpet, can only be used if the car is equipped with the smaller type of spare wheel for speeds up to 80 km/h.
To use the accessory in cars equipped with a spare wheel matching the other wheels of the car, a new spare wheel and a spacing collar with a support plate must be purchased separately.
Preparations
- Remove the existing cargo compartment carpet. Fold the front section of the carpet over the rear section. Lift the entire carpet forward slightly, twist the carpet. Remove the carpet from the cargo compartment. Place the carpet to one side.
- Remove the existing polystyrene support by the spare wheel.
Illustration A applies to cars equipped with a small spare wheel
- Install the new polystyrene support by the spare wheel as illustrated. Remove the spare wheel if necessary.
Illustration B applies to cars with a spare wheel matching the other wheels of the car
- Remove the existing spare wheel
- Install the smaller spare wheel and the new polystyrene support as illustrated in illustration A
- Press the spacer pipe into place with the support plate in the attachment unit.
Installation
- Install the combined carrier bag holder/cargo compartment carpet in the cargo compartment
- Securely lock the rear edge into place. Twist both the knobs in the direction of the arrow.
Use
- Fold up the carrier bag holder
- Hook the carrier bag onto one of the hooks.
Обсуждение и оценка
0Пока нет комментариев. Будьте первым.