Применимость
| Модель | Двигатель | Год |
|---|---|---|
| XC90 | — | 2003–2015 |
- Before installing check the measurement at point A = 410 mm. Adjust as necessary.
- Screw in the support plate (1).
- Install the lower bracket (2) as illustrated.
- Position the cargo compartment wall with the clamps into the car.
- Open the upper clamp and affix it loosely on the top bar of the safety grille.
- Open the lower clamp and affix it as illustrated. Tighten the clamps only exactly as much as necessary to grip the grille, do not tighten them yet.
- Adjust so that the cargo compartment wall is vertical and in the centre of the cargo compartment.
- Screw up the support plate (1) so that it is in contact with the headlining panel. The support plate must be parallel with the roof panel.
- Screw down the rear support foot (2) so that the cargo compartment wall is tensioned.
- Screw down the front support foot (3) so that the cargo compartment wall stands in a straight, vertical position.
- Tighten the knobs (1) and (2).
- Check that the cargo compartment wall does not make contact with the tailgate when it closes.