Применимость
| Модель | Двигатель | Год |
|---|---|---|
| S60 (11-) | — | 2011–2015A |
| V60 | — | 2011–2015A |
Примечание: This accessory requires software unique to the car.
- Turn the ignition key to position 0.
Примечание: Wait at least three minutes before disassembling the connector or removing other electrical equipment.
- Disconnect the connector from the lamp and place to one side. Use a new lamp.
- Take the sensor and new lamp from the kit.
- Press the sensor into the lamp.
- Connect the sensor to the existing cable that is on top of the roof panel.
- Connect the lamp. The contact in the sensor should point to the left and the contact in the lamp to the right when the unit is reinstalled in the car.
- Download software (application) for the accessory's function according to service information in VIDA. See VIDA or accessories catalogue for article number on software.
Обсуждение и оценка
0Пока нет комментариев. Будьте первым.