Alarm, Volvo Guard Alarm System, movement sensor (2009, 2010)

• Turn the ignition switch to position 0.

Примечание: Wait at least three minutes before disassembling the connector or removing other electrical equipment.

• Carefully prize off the reading lamp in the roof using a weatherstrip tool.

• Disconnect the cable from the reading lamp and place to one side.

• Take the new reading lamp and sensor from the kit. Press the sensor into the reading lamp. Make sure that all catches have engaged. The connector in the sensor must point to the left and the connector in the lamp to the right when the unit is reinstalled in the car.

• Plug both connectors into the reading lamp/sensor.
• Reinstall the unit into the roof panel.

• Programme the software in accordance with the service information in VIDA.