Применимость

Модель Двигатель Год
S40 (-04) B4194T 1999
S40 (-04) B4194T2 2000
S40 (-04) B4204T 1999
S40 (-04) B4204T2 2000
V40 (-04) B4194T 1999
V40 (-04) B4194T2 2000
V40 (-04) B4204T 1999
V40 (-04) B4204T2 2000

Подсказка: Activate components/functions by clicking on the symbol for VCT 2000.

No. Component Function
1 FUEL PUMP The fuel pump (FP) is activated for 4 seconds.The fuel pump (FP) runs also when other components are activated
2 EVAP valve The canister purge (CP) valve is activated once for 4 seconds.A clicking noise is heard from the valve.
3 TC CONTROL VALVE The turbocharger (TC) control valve is activated once for 4 secondsA clicking noise is heard from the valve.
4 ENG.FAN. LO-SPD The engine cooling fan (FC) low-speed, the fan runs for 3 seconds.The engine cooling fan (FC) can be heard clearly.
5 ENG.FAN. HI-SPD Engine cooling fan (FC) high-speed, the fan runs for 3 secondsThe engine cooling fan (FC) can be heard clearly.
6 A/C CONDS FAN Air conditioning (A/C) condenser cooling fan, the fan runs for 3 seconds.The engine cooling fan (FC) can be heard clearly.
7 A/C RELAY The air conditioning (A/C) relay, the relay is activated once for 4 seconds.A clicking noise is heard from the compressor clutch.
8 INJECTOR 1 Injector 1, the injector is open 1.5 ms, closed 498.5 ms, open 1.5 ms and so on in total 10 seconds.A ticking noise is heard from the injector.
9 INJECTOR 2 Injector 2, the injector is open 1.5 ms, closed 498.5 ms, open 1.5 ms and so on in total 10 seconds.A ticking noise is heard from the injector.
10 INJECTOR 3 Injector 3, the injector is open 1.5 ms, closed 498.5 ms, open 1.5 ms and so on in total 10 seconds.A ticking noise is heard from the injector.
11 INJECTOR 4 Injector 4, the injector is open 1.5 ms, closed 498.5 ms, open 1.5 ms and so on in total 10 seconds.A ticking noise is heard from the injector.
12 IAC VALVE The idle air control (IAC) valve is activated with short pulses for 0.5 second.A buzzing noise is heard from the valve.
13 MIL Malfunction indicator lamp (MIL), malfunction indicator lamp (MIL) goes out for 4 seconds then lights up again.
14 FRONT HO2S Sensor preheating, front heated oxygen sensor (HO2S), the heating is on for 1 second.Use a voltmeter to check signal.
15 REAR λHO2S Sensor preheating, rear heated oxygen sensor (HO2S), the heating is on for 1 second.Use a voltmeter to check signal.

Обсуждение и оценка

0

Пока нет комментариев. Будьте первым.