- Place the

• Place the glasses in the holder. Secure the glasses using the strap as illustrated.

For recommended positioning of the glasses holder for each model see illustrations 2A-E.2A.Applies to S60 / V70 (00-) / V70 XC (01-) / S802B.Applies to 850 / 900 / S40 / V40 / S70 / V70 (-00) / C70 coupé / S90 / V90, without a sun roof or equipped with a power sun roof.2C.Applies to S70 / V70 (-00) / C70 convertible / S90 / V90 with manual sun roof2D.Applies to 900 with manual sun roof.2E.Applies to 400

Applies to all models and positions of the glasses holder:

• Position the glasses holder with the glasses in the intended place. Ensure that the glasses do not catch on any surrounding components
• Note the position of the holder. Mark around the mating surface of the glasses holder on the underlay. Use masking tape
• Remove the glasses from the glasses holder.

• Thoroughly clean the mating surface of the glasses holder on the underlay. Use denatured alcohol
• Remove the backing from the glasses holder
• Install the glasses holder. First press the tape hard against the underlay. Hold for a moment.

Примечание: After mounting, the tape must be allowed to harden for 24 hours at a minimum of 15ºC (60ºF) before the glasses holder can be used.

• Remove the masking tape.